
Microdrill
The Microdrill is made for cranial perforation function. It can be used by either a hand-held drill or fixed to the cranial drill holder of the stereotactic instrument. The speed is continuously adjustable from 0-38,000rpm. The direction of rotation can be switched between clockwise and counterclockwise. There are two control modes, manual or foot pedal. The handle could be fixed with the cranial drill holder and then installed to the brain stereotaxic device, the depth is easy to control. The range of 0.5-2.3mm for the drill bits can be selected according to the experimental requirements.
Send us an inquiry and our team will respond within 24 hours.
The Microdrill is made for cranial perforation function. It can be used by either a hand-held drill or fixed to the cranial drill holder of the stereotactic instrument, which makes it simple to operate and easy to master.
The standard configurations include main controller, handle with one bracket, foot pedal, 5 pieces drill bits (round tips φ0.6mm).
- The speed is continuously adjustable from 0-38,000rpm.
- The direction of rotation can be switched between clockwise and counterclockwise.
- There are two control modes, manual or foot pedal.
- The handle could be fixed with the cranial drill holder (Cat no. 30-2072) and then installed to the brain stereotaxic device, the depth is easy to control.
- The range of 0.5-2.3mm for the drill bits can be selected according to the experimental requirements.
Order Information:
| Cat no. | Description |
|---|---|
| 19-7010 | Microdrill, 220V |
| 19-7011 | Microdrill, 110V |