
Cat no. 32-0020 (The Base and Holder not included)
Manual Micromanipulators (M3 Series)
The M3 micromanipulator is widely used in experimental occasions requiring high stability and accuracy. The three moving axes use a clever vertical superposition combination design to reduce the size and save much more space.
Send us an inquiry and our team will respond within 24 hours.
The M3 micromanipulator is widely used in experimental occasions requiring high stability and accuracy. The three moving axes use a clever vertical superposition combination design to reduce the size and save much more space. The forward and backward control knobs for each axis are set vertically at the rear, making it easy to operate and convenient to adjust the positioning of the knobs under microscope.
While moving, there would be no drift, side clearance, migration and pasting. The key patented transmission technology is used to further ensure the smooth and fine adjustment of transmission.
For the X-axis, both coarse and fine moving adjustment are used.
- X axis (fine): moving 13mm, reading accuracy is 10um(0.01mm).
- X-axis (coarse): moving 45mm, reading accuracy 100um (0.1mm).
- Y axis (coarse): moving 22mm, reading accuracy 100um (0.1mm).
- Z axis (coarse): moving 27mm, reading accuracy 100um (0.1mm).
M3 Basic Models (The Base and Holder not included):
| No. | Cat no. | Description |
|---|---|---|
| 1 | 32-0010 | Manual Micromanipulator, Left |
| 2 | 32-0020 | Manual Micromanipulator, Right |
M3 with X2-axis Angle of Pitch Adjustment (The Base and Holder not included):
On the basis of the above M3 Micromanipulators, angle of pitch adjustment are added onto the following X2-axis and/or Base. The base angle of pitch is 0-70°, and the X2-axis is 0-50°.
The stable base can be placed directly on an ordinary experimental table, or can be fixed on a magnetic base, or use with magnetic optical plates or vibration isolation tables.
| No. | Cat no. | Description |
|---|---|---|
| 1 | 32-0030 | Manual Micromanipulator, Left |
| 2 | 32-0040 | Manual Micromanipulator, Right |
M3 with X2-axis Angle of Pitch and Base (The Holder not included):
| No. | Cat no. | Description |
|---|---|---|
| 1 | 32-0050 | Manual Micromanipulator, Left |
| 2 | 32-0060 | Manual Micromanipulator, Right |
Bases and Holders for Manual Micromanipulators:
Please note that the core Micromanipulator, the Base and the Holder should be purchased individually.
| No. | Cat no. | Description |
|---|---|---|
| 1 | 32-2001 | Micromanipulator Base-I, φ12MM |
| 2 | 32-2002 | Micromanipulator Base (Magnetic)-II, φ12MM |
| 3 | 32-2006 | Micromanipulator Base-III, φ12MM |
| 4 | 32-2003 | Capillary Glass Holder, clamping range 1-2 MM |
| 5 | 32-3009 | Capillary Glass, φ0.53*1.14mm, pk of 100. |